Autoplay
Autocomplete
Previous Lesson
Complete and Continue
Cisco CCNA 200-301 Full Course with Practical LABS
Introduction to Networking
Physical Hardware vs VIRL vs GNS3 vs Cisco Packet Tracer (17:27)
OSI Model, Encapsulation vs De-Encapsulation, Protocol Data Unit (PDU) (19:08)
TCPIP CSMACD Collision Domain and Broadcast Domain (14:33)
Understanding ARP, Unicast, Broadcast and Multicast (10:47)
What is TCP vs UDP (14:01)
First Time Access to the Cisco Switch
How to connect to the Cisco Switch to be able to configure it (3:18)
Connecting to the Cisco Switch via the console using TerraTerm (3:57)
User vs privilege mode, Hostname, console password, RAM vs NVRAM (16:36)
Use help to get assisted with the configuration (4:36)
Local Area Network (LAN)
Intro: LAN (Ethernet, Straight-through, Crossover, Fiber) (11:21)
How the switch learn the Addresses (6:41)
Troubleshooting Interfaces on the Switch (14:44)
Virtual Local Area Network (VLAN)
Intro: VLAN (0:54)
Why we need VLANs in our network and how VLANs work (Part 1) (17:30)
Why we need VLANs in our network and how VLANs work (Part 2) (15:17)
Creating VLANs and making the ports as access port on the Cisco Switch (11:11)
Configuring Trunk ports on the Cisco Switch (11:04)
Understand how Vlan Trunking Protocol (VTP) works - Server, client, Transparent (13:35)
Understand and configure Native VLAN on Cisco Switch (8:09)
Configuring Voice VLAN on the Cisco Switch (9:18)
Spanning-Tree Protocol
Intro: Spanning-Tree Protocol (1:10)
Explaining Problems on Redundant switching (10:34)
Explanation of how Spanning-Tree works (14:14)
Interface States in STP (8:27)
Difference between STP and RSTP (6:54)
Configuring Rapid-PVST and PortFast (12:54)
Spanning Tree BPDU Guard (4:52)
EtherChannel (Link Aggregation)
Intro: EtherChannel (0:42)
EtherChannel Explained (6:25)
Configuring EtherChannel using the Manual mode (6:56)
Configuring EtherChannel using the PAGP mode (5:50)
Configuring EtherChannel using the LACP mode and Load Balancing (8:36)
IPv4 Addressing
Intro: IPv4 (1:43)
Understand IP addressing (Public vs Private) and Subnet mask (18:58)
Decimal to Binary conversion and vice versa (8:11)
Subnetting calculation (12:55)
How to calculate a summary address (4:32)
First time access to the Cisco Router
Intro: Cisco Router (1:16)
What is the Cisco Router and some Basic Configuration (13:49)
DHCP Client, Ping, Traceroute and interfaces (15:02)
Secure the Console port on the Cisco IOS Router (2:33)
Enable and secure Telnet on the Cisco IOS Router (6:21)
Configuring SSH on Cisco IOS Router (12:14)
Router on a Stick, Inter-VLAN Routing & L3 EtherChannel
Intro: Router on a Stick, Inter-VLAN Routing & L3 EtherChannel (1:21)
Understand and configure Router on a Stick on Cisco IOS (21:31)
Configuring InterVLAN Routing on Cisco L3 Switch (14:01)
Configuring L3 EtherChannel (7:57)
IP Routing
Intro: IP Routing (0:51)
Why we need Routing in our network and what is the function of the Router (10:56)
Static Route vs Default Route (16:37)
Floating Static Route (11:40)
Internet Protocol v6 (IPv6)
Intro: IPv6 (0:51)
IPv4 Exhaustion and addresses used (8:16)
IPv6 Successor to IPv4 (4:58)
IPv6 Characteristics (5:32)
IPv6 internet registries IANA RIR LIR (9:54)
IPv6 address Notation (11:18)
How to find the prefix of the IPv6 address (13:31)
IPv6 addresses types (7:29)
IPv6 Link-local address (8:25)
IPv6 Unique local address (7:17)
IPv6 Multicast address (3:37)
IPv6 Global Unicast address (3:35)
IPv6 Static Routing (18:24)
IPv6 Statless Autoconfiguration (8:57)
Open Shortest Path First (OSPF)
Intro: Open Shortest Path First (OSPF) (1:39)
EGP vs IGP and how Link State works (15:16)
OSPF areas and routers tasks (11:42)
Configuring OSPF in the backbone area (21:04)
What are OSPF Hello Packets (5:18)
Manipulating the Hello Packets in OSPF (18:13)
What is DR and BDR Election (12:56)
LAB: DR and BDR Election (16:13)
Understanding and configuration passive interface in OSPF (9:07)
OSPF Default Route (6:30)
Wireless
Intro: WLAN Fundamentals (0:53)
RF Frequency and Wavelength (10:58)
RF Fundamentals (10:48)
802.11 Beacon- Probing- Authentication- Association and Data (10:27)
Free Space Path Loss (FSPL) (10:19)
Signal Attenuation (7:15)
2.4 GHz spectrum and non-overlapping channels (6:32)
2.4 GHz co-interference and adjacent interference channels (4:10)
5 GHz and Channels Bonding (6:18)
IEEE 802.11 WLAN Standards (4:51)
Noise Floor and Signal to Noise Ratio (SNR) (8:49)
Access Control List (ACL)
Intro: Access Control List (1:01)
What is Access Control List (22:41)
Configuring Standard Access List (14:10)
Access Control list for line vty (12:45)
Configuring Extended Access List (13:36)
DHCP using IPv4 and IPv6
Intro: Dynamic Host Configuration Protocol (DHCP) (1:06)
Understand the DCHP Process (DORA) (12:45)
Configure DHCPv4 Server on Cisco IOS (12:29)
Configure DHCPv4 client on Cisco IOS (8:09)
IPv6 Global Unicast Address Dynamic assignment (Stateless vs Stateful) (14:46)
Configure DHCPv6 Stateless Server (13:07)
Configure DHCPv6 Stateless Client (6:50)
Configure DHCPv6 Stateful Server (10:02)
Configure DHCPv6 Stateful Client (6:51)
First Hop Redundancy Protocols (FHRPs)
Intro: First Hop Redundancy Protocols (2:36)
What is First Hop Redundancy Protocol (8:09)
Understand and Configure HSRP (14:38)
Priority and Preemption on HSRP (7:33)
LAN Security
Intro: LAN Security (1:08)
LAN Security explained (13:58)
MAC Address Table Attack (7:32)
Configuring Port-Security to secure from MAC Address Table Attack (14:09)
VLAN Hopping Attacks (8:42)
VLAN Attacks Mitigation (7:44)
DHCP Snooping against DHCP Attacks (9:56)
Network Address Translation (NAT)
Intro: NAT (1:25)
Understand how NAT works and be familiar with the NAT terminology (7:56)
Configuring Static NAT (13:27)
Configuring Dynamic NAT on Cisco IOS (11:45)
Configuring PAT on Cisco IOS (15:58)
VPN and IPSEC Concepts
Intro: VPN and IPSEC (0:55)
What is VPN (9:20)
What is IPSEC (9:10)
What is IPSEC Protocol Suite (4:29)
IPSEC modes of communication - Transport vs Tunnel mode (8:10)
Types of Encryption - Symmetric vs Asymmetric (5:46)
Security over the internet using IPSEC (Diffie-Hellman) (14:01)
Encryption Protocol (DES-3DES-AES-Blowfish-Camellia-RSA-DH) (12:07)
Data Integrity - Hashing Algorithms (MD5 - SHA1 - SHA256 - SHA512) (8:01)
IPSEC Authentication (Pre-shared key vs Certificates) (6:54)
IPSEC Negotiation Protocols (AH vs ESP) (6:26)
IPSEC Negotiation Process and choices of IPSEC interesting traffic (7:43)
IPSEC IKE Phase 1 (ISAKMP Tunnel) (6:46)
IPSEC IKE Phase 2 (IPSEC Tunnel) (5:38)
IPSEC Data Transfer (2:18)
Network Management
Intro: Network Management (1:21)
Device Discovery using CDP Protocol (11:01)
Link Layer Discovery Protocol (LLDP) (7:59)
Network Time Protocol (NTP) (9:41)
Logging and Syslog Server (17:36)
File Systems and TFTP (9:55)
Password Recovery on Cisco router (12:42)
Cisco IOS Image backup and Boot system (13:51)
Quality of Service (QOS)
Intro: Quality of Service (QOS) (1:12)
Network Traffic Characteristics (10:33)
Cisco Queuing Algorithms (12:18)
Cisco QOS Models (14:08)
QOS Implementation tools (8:24)
Software-Defined Networking (SDN), Automation & Programmability
Intro: Automation and Programmability (1:41)
Control Plane vs Data Plane vs Management Plane (7:43)
What is Software Defined Networking (SDN) (7:26)
Network Virtualization Technologies (6:49)
Types of SDN (7:30)
Data Formats (XML, JSON, YAML) (13:08)
Application Programming Interface (API) (6:32)
RESTful API (15:17)
Thank You + Next Steps
Thank You – Feedback, Rewards & More
Connecting to the Cisco Switch via the console using TerraTerm
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock