Autoplay
Autocomplete
Previous Lesson
Complete and Continue
MikroTik Enterprise Wireless Engineer with LABS
WLAN Fundamental
Introduction WLAN Fundamental (1:10)
Understanding Wireless Terminology (12:32)
Wireless Tools on MikroTik
Introduction to Wireless Tools on MikroTik (0:54)
Frequency Usage / Spectral Scan / Spectral History (13:15)
MikroTik Wireless Alignment Tool (8:45)
Wireless Snooper and Sniff Tool (13:16)
Wireless Scan Tool and Reset Configuration (8:29)
Wireless Frequency mode and TX power change
Introduction to Wireless Frequency Mode (1:19)
MikroTik Frequency Modes Regulatory-domain Manual Tx power Superchannel (13:43)
Changing the TX power for a better signal reception (10:36)
MikroTik Wireless Data rate and chains
Introduction to Wireless data rate and chains (1:04)
Wireless Chains and difference between SISO and MIMO (9:18)
Avoid Data Rate flapping using the basics and supported data rate options (13:43)
Wireless Link Quality - Troubleshooting
Introduction - Wireless Link troubleshooting (1:08)
Wireless SNR CCQ and HW Frames (19:22)
Advanced Distance Noise Floor Threshold and HW Fragmentation Threshold (9:32)
RTS CTS CTS to Self HW protection Threshold and Adaptive Noise Immunity (14:48)
Channel Width, Channel Bonding & Guard interval
Introduction - What is channel width channel bonding and guard interval (1:04)
Channel Width and Channel Bonding (11:31)
Changing the Guard interval for more or less throughput (17:53)
MikroTik Wireless Repeater
Introduction What is a wireless repeater (1:00)
Configuring the router as a wireless repeater using the repeater setup (10:06)
Wireless Security
Introduction to Wireless Security (1:37)
Wireless security using Dynamic Static keys and EAP (20:37)
Management Protection to forbid De-authentication attacks on Wireless (7:41)
Default Authenticate and Access list (18:47)
Connect list to allow the station to connect to the right AP (17:38)
CAPsMAN
Connecting all CAPs to the CAPsMAN (21:14)
Configuring Channels on the CAPsMAN (16:28)
Configuring security profiles on the CAPsMAN (5:53)
Configuring Datapaths on the CAPsMAN (18:28)
Configuring Configuration Containers on the CAPsMAN (15:25)
Configuring Provisioning on the CAPsMAN (13:36)
Configuring VLANs on the CAPsMAN and assign it to different wireless networks (14:36)
Upgrading the CAPs softwares from the CAPsMAN (21:15)
Configuring Access List on the CAPsMAN (14:47)
Configuring a CAPsMAN Backup for Automatic failover (23:44)
Thank You + Next Steps
Thank You – Feedback, Rewards & More
Configuring Access List on the CAPsMAN
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock